CLAMP RING PUMP PROCON 45 L/H
Balanced by pass, with 12bar security valve, total lenght 80mm, fitting 3/8 NPT code 9R10NPT-P
Before assembly, fill the pump with water and manually rotate the rotor shaft back and forth a few times. At the same time, grease the end of the pump rotor shaft and its coupling on the motor shaft. Make sure that the pump is protected by a filter (0.15mm mesh) to prevent the entry of particles and foreign bodies. Avoid running the pump dry. Attacks must be sufficiently blocked.
Make sure that any sealing material does not enter the pump.