9V36
CLAMP RING PUMP FLUID-O-TECH 200 L/H
The FLUID-O-TECH rotary vane pump is the beating heart of every professional coffee machine.
Together with the motor, which allows it to rotate at high speed, it increases the water pressure within the machine's hydraulic circuit, bringing it up to 9 bar, the ideal value for achieving the best espresso extraction.
To ensure the pump's full efficiency over time, it is essential to prevent impurities in the water—such as sand or limescale—from reaching the internal graphite vanes, which could damage them or cause premature wear.
To ensure proper operation, DVG recommends the use of the following protective filters:
• Wound wire filter - code 9V905, to be installed upstream of the machine;
• Mechanical filter - code 8W56116-P, to be applied directly to the pump.
This clamp pump is also equipped with a balanced bypass, useful for precisely adjusting the operating pressure, ensuring stability and uniformity during dispensing.
For connection to the machine's internal pipes, 3/8" GAS fittings (code 9R10-P) are also available on the DVG website, which are perfectly compatible with the model.
The compact dimensions of the FLUID-O-TECH clamp pump make it easy to install:
• Overall length: 99 mm
• Body length: 86 mm
The rectangular label on the pump body contains the serial number, production date, and all other identifying information.
Caution: Do not remove the label, as this will void the product warranty.
