4SC000178
 

4SC000178

  AEROPRESS COFFEE MAKER 80R08 370g - HARIO
Note:
AeroPress© defines a new way to prepare coffee: coffee at home and, why not, also in travels! Water and coffee powder are infused as you want depending on the outcome you want to achieve: for a softer and delicate cups, the infusion lasts a few seconds, but if you want a stronger taste and with a hint of bitter, just extend the infusion time. After the infusion time, exercising a delicate pressure thanks to the RAM: at this point the pressure extracts from water aromatic characteristics that normally filter coffee remain unspoken.
 
novita
4SC000179
 

4SC000179

  HARIO COFFEE DRIPPER VDC-01W V60 CERAMIC
Note:
11 x 10,5 x 9,5cm.Hole D.95 1/2 cups. Classic ceramic Dripper Coffee, keeps heat for a long time. The V60 has a large central hole. The cone shaped paper filter (cod.4SC000189, 4SC000190) adds depth to the coffee layer, so that the water flows to the center, extending the amount of time it is in contact with the ground coffee.
 
novita
4SC000192
 

4SC000192

  HARIO CERAMIC MANUAL COFFEE GRINDER SKERTON 100g
Note:
W. 172 × D. 93 × H.231mmCoffee grounds 100g. The coffee grinders burrs are made of ceramic. The ceramic burrs do not transfer heat and shave the coffee bean versus cracking the bean like blade grinders. This process provides a more consistent grind that can easily be adjusted and set for repeat use.
 
novita
 

4SC000248

  BLACK COFFEE DRIPPER VDGN-02B GLASS - HARIO
Note:
W.128 × D.115 × H.95mmHole d.115 1/4 cups
 
novita
4SC000429
 

4SC000429

  INOX CONE FOR BREWING ESPRESSO
Note:
The cone filter is a filter that replaces the classic filter in paper V60 and has the same type of filtration.The filtration in s.steel leaves a more round and aromatic substance.External diameter: 145 mmHeight: 95 mmShape V60°Filtration: Woven Wire Inox MembraneProtective Inox mesh
4SC000430
 

4SC000430

  S.STEEL DRIPPER FOR BREWING ESPRESSO
Note:
Thanks to the direct extraction, coffee does not get in contact with other material, allowing a better control on the extraction and on temperature.Superior diameter: 145 mmHeight: 95 mmShape V60°Filtration: Woven Wire Inox Membrane3 supporting cylinder in A2 stainless steelLower support: Triangular shape
4SC000431
 

4SC000431

  S.STEEL FLOWER WAVE FOR BREWING ESPRESSO
Note:
Flower Wave designed for the paper Wave FilterConceived to allow the use of the most common paper filters, E&B carafe such as Chemex and Kinto.Flower style has been designed to facilitate the introduction and extraction of paper filter in the carafe.It poetically allows to see all the process of brewing.The characteristic long petal serves as a grip while other ones are designed to support paper.Unlike most filter media, Flower does not change the beverage temperature. 
4SC000432
 

4SC000432

  S.STEEL FLOWER V60 & CHEMEX FOR BREWING ESPRESSO
Note:
Flower Wave designed for the paper Wave FilterConceived to allow the use of the most common paper filters, E&B carafe such as Chemex and Kinto.Flower style has been designed to facilitate the introduction and extraction of paper filter in the carafe.It poetically allows to see all the process of brewing.The characteristic long petal serves as a grip while other ones are designed to support paper.Unlike most filter media, Flower does not change the beverage temperature.
 

4SC102301

  PAPER FILTER FOR BASKET D.110/360MM 250 PCS -BRAVILOR
Note:
Original code 7.150.102.301These filters guarantee an optimal coffee distribution and a delicious aroma. For shape and volume, they are the optimal solution for fine ground coffee.
 
novita novita
 

4SC950005

  OPTICAL REFECTOR FOR COFFEE 0-18% BX
Note:
The refrector is a tool that measures the percentage of dissolved substances in the sample. That substace is refracted by a light.For the espresso the correct value is between 8 and 12%, while for filter preparations is between 1.2 and 1.45%.
8C68124
 

8C68124

  CIMBALI 1 CUP COMPETITION FILTER (6/9GR) H.24,5MM
Note:
IMS code B681TH24.5EEdge D.68mm, Body D.60mm suitable to tamper D.58mm, height 24,5mm, external ridge 60,3mm. Perfored area d.30mm, holes d.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Carimali, Gaggia, La Cimbali.
8C68224
 

8C68224

  CIMBALI 2 CUPS COMPETITION FILTER (12/18GR) H.24,5MM
Note:
IMS code B682TH24.5MEdge D.68mm, Body D.60mm suitable to tamper D.58mm, height 24,5mm, ridgless. Perfored area d.44mm, holes d.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Carimali, Gaggia, La Cimbali
8F00273PT
 

8F00273PT

  FAEMA FILTER BASKET 2 CUPS 14GR H.24,5MM BORDER D.70MM EXTERNAL RIDGE - TEFLON® COATED
Note:
INOX coffee filter TEFLON® coated. 100% food friendly. Clean with smooth brush. It fits Faema, Rancilio, Vibiemme, Astoria, Bezzera, Wega, Bfc Royal, Elektra, SV, Sanremo, Brasilia, other.Clean only with a soft cloth or a brush with soft bristles
8F1102PT
 

8F1102PT

  FAEMA CAULKED SCREEN SHOWER - TEFLON® COATED
Note:
Made in Italy. INOX screen shower TEFLON® coated. 100% food friendly. Clean with smooth brush. Made in Italy.Suitable to: Faema, Wega, Vibiemme, Bfc Royal, Sv Italia, Expobar, others.Clean only with a soft cloth or a brush with soft bristles
8F146PT
 

8F146PT

  FAEMA FILTER BASKET 1 CUP 7GR H.24MM BORDER D.69,5mm EXTERNAL RIDGE, TEFLON® COATED
Note:
INOX coffee filter TEFLON® coated. 100% food friendly. It fits: Faema, Rancilio, Vibiemme, Astoria, Bezzera, Wega, Bfc Royal, Elektra, SV, Sanremo, Brasilia, other.Clean only with a soft cloth or a brush with soft bristles
8F70126
 

8F70126

  SINGLE CUP FILTER COMPETITION H.26,5MM (7/9GR)
Note:
IMS code B701TH26.5EEdge D.70mm, Body D.60mm suitable to tamper D.58mm. Holes area D.30mm, holes diameter 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: La Marzocco, Synesso, Slayer, Kees Van Der Westen, Nuova Simonelli, Victoria Arduino, Rancilio, Promac, Magister, Astoria, Conti Sacome, Elektra, La Pavoni, Fracino, Faema, Vibiemme, Wega, Ascaso, Bezzera, BFC Royal, Bianchi, Brasilia, DID Orchestrale, ECM, Expobar, Fiorenzato, Grimac, Iberital, La Nuova Era, La Scala, Quality Espresso, Rocket, Royal First, Sanremo, SV SAB Italia, VFA, E61 standard.
8F70224
 

8F70224

  DOUBLE CUP FILTER COMPETITION H.24,5MM (12/18GR)
Note:
IMS code B702TH24.5MEdge D.70mm, Body D.60mm suitable to tampers D.58mm. Holes area D.44mm, holes diameter D.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: La Marzocco, Synesso, Slayer, Kees Van Der Westen, Nuova Simonelli, Victoria Arduino, Rancilio, Promac, Magister, Astoria, Conti Sacome, Elektra, La Pavoni, Fracino, Faema, Vibiemme, Wega, Ascaso, Bezzera, BFC Royal, Bianchi, Brasilia, DID Orchestrale, ECM, Expobar, Fiorenzato, Grimac, Iberital, La Nuova Era, La Scala, Quality Espresso, Rocket, Royal First, SAnremo, SV SAB Italia, VFA, E61 standard.
8F70226
 

8F70226

  DOUBLE CUP FILTER COMPETITION H.26,5MM (16/20GR)
Note:
IMS code B702TH26.5MEdge D.70mm, Boby D.60mm suitable to tamper D.58mm. Holes area D.44mm, holes diameter 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: La Marzocco, Synesso, Slayer, Kees Van Der Westen, Nuova Simonelli, Victoria Arduino, Rancilio, Promac, Magister, Astoria, Conti Sacome, Elektra, La Pavoni, Fracino, Faema, Vibiemme, Wega (not suitable for 8W897), Ascaso, Bezzera, BFC Royal, Bianchi, Brasilia, DID Orchestrale, ECM, Expobar, Fiorenzato, Grimac, Iberital, La Nuova Era, La Scala, Quality Espresso, Rocket, Royal First, SAnremo, SV SAB Italia, VFA, E61 standard.
8F70228
 

8F70228

  DOUBLE CUP FILTER COMPETITION H.28,5MM SMOOTH (18/22GR)
Note:
IMS code B702TCH28.5EEdge D.70mm, Body D.60mm suitable to tampers D.58mm. Holes area D.49mm, holes diameter D.0,30mm,  holes diameter 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: La Marzocco, Synesso, Slayer, Kees Van Der Westen, Nuova Simonelli, Victoria Arduino, Rancilio, Promac, Magister, Astoria, Conti Sacome, Elektra, La Pavoni, Fracino, Faema, Vibiemme, Wega, Ascaso, Bezzera, BFC Royal, Bianchi, Brasilia, DID Orchestrale, ECM, Expobar, Fiorenzato, Grimac, Iberital, La Nuova Era, La Scala, Quality Espresso, Rocket, Royal First, Sanremo, SV SAB Italia, VFA, E61 standard.
8SM661250
 

8SM661250

  SAN MARCO 1 CUP COMPETITION FILTER (6/9GR) H.25MM
Note:
Edge D.66mm, Body D.56mm suitable to tamper D.54mm, height 25mm, external ridge 57mm. Perfored area d.30mm, holes d.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Dalla Corte, La San Marco
8SM662260
 

8SM662260

  SAN MARCO 2 CUPS COMPETITION FILTER (14/18GR)
Note:
IMS code B662TH26MEdge D.66mm, Body D.56mm suitable to tamper D.54mm, height 26mm, external ridge 57mm. Perfored area d.44mm, holes d. 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Dalla Corte, Izzo, La San Marco.
8SM662320
 

8SM662320

  LA SAN MARCO 3 CUPS COMPETITION FILTER 18/20GR H.32MM RIDGELESS
Note:
IMS code B662TH32MEdge D.66mm, Body D.56mm suitable to tamper D.54mm, height 32mm, ridgeless. Perfored area d.44mm, holes d. 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Dalla Corte, La San Marco
8SP651250
 

8SP651250

  SPAZIALE 1 CUP COMPETITION FILTER 7GR
Note:
IMS code B651TH25EEdge D.65mm, Body D.55mm suitable to tamper D.53mm, height 25mm, external ridge 55,5mm. Perfored area d.30mm, holes d. 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Astoria (only plus4you), La Spaziale, Wega (only concept)
8SP652275
 

8SP652275

  SPAZIALE 2 CUPS COMPETITION FILTER 14GR H.27,5MM
Note:
IMS code B652TH27.5MEdge D.65mm, Body D.55mm suitable to tamper D.53mm, height 27,5mm, external ridge 55,5mm. Perfored area d.44mm, holes d. 0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Astoria (only plus4you), La Spaziale, Wega (only concept)
8SP652320
 

8SP652320

  SPAZIALE 3 CUPS COMPETITION FILTER 18GR H.32MM RIDGELESS
Note:
IMS code B652TH32MEdge D.65mm, Body D.55mm suitable to tamper D.53mm, height 32mm, ridgeless. Perfored area d.44mm, holes d.0,30mm, high-quality conical drilling, electropolished filter that keeps the surface more shiny, smoother, more stainless. It fits: Astoria (only plus4you), La Spaziale, Wega (only concept)
9V00585LC
 

9V00585LC

  LEO COFFEE TAMPER, GUN METAL HANDLE WITH S. STEEL FLAT BASE D.58,5MM
Note:
Made in Italy. Ergonomic tamper with soft natural bristles on the external border. Leo allows you to press coffee and clean the border of the filter with just one gesture. Practical use. Option for customization with your logo.
 
novita
9V008350
 

9V008350

  MOTTA ADJUSTABLE COFFEE LEVEL TAMPER D.58MM
Note:
It is height adjustable to be used with any filter and dose. Avoid using your hands during coffee leveling. It allows to obtain a coffee panel with a homogeneous density, minimizing channeling situations and increasing coffee extraction, ensuring greater consistency in the amount of espresso served.